Would an AEG inner barrel work for an Airsoft bolt action sniper rifle?
Wednesday, February 8th, 2012 at
6:17 pm
I’ve been looking into getting an inner barrel and a new spring for this airsoft gun – http://www.airsplat.com/Items/AR-WELL-MB04-C.htm , but I can’t seem to find any good inner barrels. I measured the inner barrel of the gun, and I got about 510.5 MM. So would an AEG inner barrel like this – http://www.airsoftpost.com/product_info.php?products_id=32665 fit into the gun without any problems? And does anyone have any suggestions for a good spring?
Filed under: Air Bed
Like this post? Subscribe to my RSS feed and get loads more!
Probably not without a lot of modification. For the most part, they’ll be very similar, but its all a matter of how the hop up bucking and hop up unit actually mount directly to the barrel. You would probably have to do some dremel work which I would NOT recommend unless you have a lot of experience fabricating custom parts. If you mess it up, you may permanently damage the barrel and you may have wasted a lot of money. I know that the MB01 and MB04 share the same upper receiver so you can use the UTG L96 Upgrade kit on it: http://www.airsplat.com/Items/AC-UPI-UTG-KT01.htm
OK I don’t think that would work as there two very different monsters. A sniper will pretty much have a tight bore built into it as it is needed for precision…an AEG doesn’t usually need that. As far as a sniper you might want to get a upgrade kit. Look at this
http://www.airsplat.com/Items/AC-UPI-UTG-KT01.htm
I don’t think that this barrel will be compatible with that rifle. Usually spring guns don’t have a lot of upgrade parts. I would suggest though looking at this upgrade kit, I think that it might work for your gun.
http://www.airsplat.com/Items/AC-UPI-UTG-KT01.htm